Выберите цвет:
Расширенный поиск

Файловый архив Как загрузить файлы Проблемы с регистрацией? Калькулятор мультифида Новичкам читать !!! Справка
Вернуться   westsat.net.ua > Cпутниковые ресиверы > HDTV ресиверы > Kathrein UFS 910
Загрузка...
Правила S-Finder Пользователи Календарь Все разделы прочитаны

Важная информация

Ответ
 
Опции темы
Старый 20.11.2009, 02:40   #1
RATVOD
Супер Модератор

 
Аватар для RATVOD
 
RATVOD вне форума
Регистрация: 01.08.2009
Страна: Ukraine
Адрес: Киевская, Тараща.
Возраст: 63
Сообщений: 548
Сказал(а) спасибо: 8.944
Поблагодарили 4.862 раз(а) в 856 сообщениях
Репутация: 14589
По умолчанию Программы для работы с ресивером Kathrein UFS 910/922

Программы для работы с Kathrein UFS 910/922


Последний раз редактировалось maral100; 22.12.2009 в 23:05.
  Ответить в расширенном режиме
Старый 02.12.2009, 00:03   #2
RATVOD
Супер Модератор

 
Аватар для RATVOD
 
RATVOD вне форума
Регистрация: 01.08.2009
Страна: Ukraine
Адрес: Киевская, Тараща.
Возраст: 63
Сообщений: 548
Сказал(а) спасибо: 8.944
Поблагодарили 4.862 раз(а) в 856 сообщениях
Репутация: 14589
По умолчанию

AAF_MultiPartinstaller1.6_UFSxxx

I build another program to use Multipart for BA.
It's NOT to replace KCC but we can use this untill VisMan has more time to add multipart to KCC.
It's like BA_help from GOst4711.
Only we made a few more options.

Читать дальше... 
- Install BA on UFS922 in Flash (with org. image or new E2 flash image)
- Installing a image from Flash / BA / UFS_Image for UFS910 and UFS922.
- Install a image from ../UFS_Images
- Reboot
- delete image
- rename image
- Set Boot image
- drag and drop from UFS_Images to Installed images list
- Copy settings, channels, var, amount.ini from running image

When installing a image you will be asked to change the name (or keep the name)
The image that is set for boot has a blue color.

Here are the copy options:

Copy channels:
/usr/local/share/enigma2/bouquets*
/usr/local/share/enigma2/userbouquet.*
/usr/local/share/enigma2/lamedb
/usr/local/share/enigma2/satellites.xml
/etc/tuxbox/satellites.xml

Copy Settings:
/usr/local/share/enigma2/settings

Copy Picons:
/usr/local/share/enigma2/picon (complete dir)

Copy mount:
/usr/automount/amount.ini
/etc/auto.misc
/usr/local/share/enigma2/automounts.xml

Copy Var:
/var/emu/*.*
/var/etc/*.*
/var/etc/autostart/start-config
/var/keys (complete dir)

Copy BlueKey action:
/var/.blueKey or /var/etc/blueKey (depending on copy from )

Copy Plugins:
/usr/lib/enigma2/python/Plugins/Extensions/ + selected plugin ( if selected )

Copy bootp.conf:
/var/baroot/ba/ba/{imagename}/bootp.conf
/var/baroot/ba/ba/{imagename}/bootp2.c

Danke an Black_64 für dieses Tool und das gute HowTo von joergurmel,
sowie den AAF-Betatestern.




Последний раз редактировалось Valera61; 19.11.2011 в 17:54.
  Ответить в расширенном режиме
Пользователь сказал cпасибо:
igrom (31.01.2010)
Старый 22.12.2009, 23:03   #3
RATVOD
Супер Модератор

 
Аватар для RATVOD
 
RATVOD вне форума
Регистрация: 01.08.2009
Страна: Ukraine
Адрес: Киевская, Тараща.
Возраст: 63
Сообщений: 548
Сказал(а) спасибо: 8.944
Поблагодарили 4.862 раз(а) в 856 сообщениях
Репутация: 14589
По умолчанию

Latest Version Of MultiPart Installer AAF UFS9XX

Код:
AAF UFS910/UFS922 MultiPart Installer V1.7              
 
AAF UFS910/UFS922 MultiPart Installer
============================
 
V1.7
 
- change path automount.xml to /var/etc/automount
- change check mini U-boot 1.3 installed AND activated.
- add copy bootp/bootp2 to current image
- add save bootp/bootp2 to disk
- add load bootp/bootp2 from disk
- add bootp/bootp2 simple editor
- fix copy auto.misc
- fix bug copy plugins
- copy bluekey only for /var/etc/bluekey
- fix bug copysettings
- fix for settings file and channel list (new rev's)
- add check for Mini U-boot 1.3 installed (can be disabled)
- add new flasch tool for UFS910/UFS922 (thanks to obiwatn76)
 
Note to new AAF LZMA E2 image:
To install the new AAF NEW LZMA E2 images you need to have Mini U-boot 1.3 installed AND active !!!
If you do install the new AAF NEW LZMA E2 image without Mini U-boot 1.3 your box will NOT boot.
Then you need to install the recovery image.
 
Note to flashtool:
The new flash tool can flash kim-images and only images.
The difference is that kim-images will change the bootargs to fit the kim-image.
When flashing just a image (without kim file) MPI flash the image but don't change the bootargs.
This can be handy when flashing the same image structure, or you want to set the bootargs your self.
 
If you have the Kathrein original FW 2.02RC in flash then MPI uses multi part flashing.
This takes a bit longer (sorry, i will later work to improve the upload speed).
 
Note to Mini:
1. Device name may have max 16 chars !!!
2. when installing a image in miniboot, MPI will copy settings,channels,...if selected !
3. make sure you add the serverip in the mainscreen (NEW)
 
To install a USB/BA image or set the boot default, click on the right mouse button to select the option.
 
Miniuboot file is not include. You must download the latest version.
MPI will ask where you stored the file. Then it will be uploaded.
 
Don't forget you need to prepare your USB stick for MiniUboot. 
 
UFS9XX MultiPart Installer
 
I build another program to use Multipart for BA.
It's NOT to replace KCC but we can use this untill VisMan has more time to add multipart to KCC.
It's like BA_help from GOst4711. 
Only we made a few more options.
 
- Install BA on UFS922 in Flash (with org. image or new E2 flash image)
- Installing a image from Flash / BA / UFS_Image for UFS910 and UFS922.
- Install a image from ../UFS_Images
- Reboot
- delete image
- rename image
- Set Boot image
- drag and drop from UFS_Images to Installed images list
- Copy settings, channels, var, amount.ini from running image 
 
When installing a image you will be asked to change the name (or keep the name)
The image that is set for boot has a blue color.
 
Here are the copy options:
 
Copy channels:
/usr/local/share/enigma2/bouquets*
/usr/local/share/enigma2/userbouquet.*
/usr/local/share/enigma2/lamedb
/usr/local/share/enigma2/satellites.xml
/etc/tuxbox/satellites.xml
 
Copy Settings:
/usr/local/share/enigma2/settings
 
Copy Picons:
/usr/local/share/enigma2/picon (complete dir)
 
Copy mount:
/usr/automount/amount.ini
/etc/auto.misc
/usr/local/share/enigma2/automounts.xml
 
Copy Var:
/var/emu/*.*
/var/etc/*.*
/var/etc/autostart/start-config
/var/keys (complete dir)
 
Copy BlueKey action:
/var/.blueKey or /var/etc/blueKey (depending on copy from )
 
Copy Plugins:
/usr/lib/enigma2/python/Plugins/Extensions/ + selected plugin ( if selected )
 
Copy bootp.conf:
/var/baroot/ba/ba/{imagename}/bootp.conf
/var/baroot/ba/ba/{imagename}/bootp2.conf
 
 
Danke an Black_64, joergurmel und den gesamten AAF Team.
  Ответить в расширенном режиме
2 пользователя(ей) сказали cпасибо:
igrom (31.01.2010), svema (22.06.2010)
Старый 24.12.2009, 01:57   #4
RATVOD
Супер Модератор

 
Аватар для RATVOD
 
RATVOD вне форума
Регистрация: 01.08.2009
Страна: Ukraine
Адрес: Киевская, Тараща.
Возраст: 63
Сообщений: 548
Сказал(а) спасибо: 8.944
Поблагодарили 4.862 раз(а) в 856 сообщениях
Репутация: 14589
По умолчанию

Latest Version Of MultiPart Installer AAF UFS9XX
AAF UFS910/UFS922 MultiPart Installer V1.7a

- add check free mem flashtool
- fix copy settings
- fix update imagelist after install BA imag
  Ответить в расширенном режиме
Пользователь сказал cпасибо:
igrom (31.01.2010)
Старый 12.01.2010, 01:16   #5
RATVOD
Супер Модератор

 
Аватар для RATVOD
 
RATVOD вне форума
Регистрация: 01.08.2009
Страна: Ukraine
Адрес: Киевская, Тараща.
Возраст: 63
Сообщений: 548
Сказал(а) спасибо: 8.944
Поблагодарили 4.862 раз(а) в 856 сообщениях
Репутация: 14589
По умолчанию

Kathrein Tools
Channel List Editor for UFS821, UFS822, UFS910, UFS922.

Version 3.9

New features:
New option to upload Satellites.xml during upload with the receivers (Enigma2)
The satellite is now editor instead of the "flags" parameter 4 check boxes for each value of the "flags" parameter set (Enigma2)

Bugs fixed:
The attributes "NoSDT" and "NoPMT" are not in the overall list of TV and radio channels displayed (Enigma2)
Transponder without lamedb channels are written to, even though they really only need to Satellites.xml (Enigma2)
Transponder from the Satellites.xml that are not in the lamedb are not displayed in the transponder list (Enigma2)

Notes
On Windows, Microsoft. NET Framework 2.0 or higher to be installed
Be installed under Linux, the Mono Framework (tested with Mono 2.0.1, and possibly WinForms must be installed from libraries with "sudo apt-get install libmono-winforms *")
  Ответить в расширенном режиме
2 пользователя(ей) сказали cпасибо:
igrom (31.01.2010), svema (22.06.2010)
Старый 12.01.2010, 01:17   #6
RATVOD
Супер Модератор

 
Аватар для RATVOD
 
RATVOD вне форума
Регистрация: 01.08.2009
Страна: Ukraine
Адрес: Киевская, Тараща.
Возраст: 63
Сообщений: 548
Сказал(а) спасибо: 8.944
Поблагодарили 4.862 раз(а) в 856 сообщениях
Репутация: 14589
По умолчанию

Kathrein Tools
Remote OSD for Kathi Enigma2 v0.1
  Ответить в расширенном режиме
3 пользователя(ей) сказали cпасибо:
axe16 (12.01.2010), igrom (31.01.2010), svema (22.06.2010)
Старый 14.01.2010, 00:37   #7
RATVOD
Супер Модератор

 
Аватар для RATVOD
 
RATVOD вне форума
Регистрация: 01.08.2009
Страна: Ukraine
Адрес: Киевская, Тараща.
Возраст: 63
Сообщений: 548
Сказал(а) спасибо: 8.944
Поблагодарили 4.862 раз(а) в 856 сообщениях
Репутация: 14589
По умолчанию

Latest Version Of MultiPart Installer AAF UFS9XX
AAF UFS910/UFS922 MultiPart Installer V1.7c

V1.7c

- fix BA detection for E2 in mini
- fix error create partitonen
- fix question 2bl on
- fix flash image name with spaces or other symbols
- check mini U-boot image name ( no *.tar.gz or *.ipk files allowed )
  Ответить в расширенном режиме
Пользователь сказал cпасибо:
igrom (31.01.2010)
Старый 01.03.2010, 20:59   #8
RATVOD
Супер Модератор

 
Аватар для RATVOD
 
RATVOD вне форума
Регистрация: 01.08.2009
Страна: Ukraine
Адрес: Киевская, Тараща.
Возраст: 63
Сообщений: 548
Сказал(а) спасибо: 8.944
Поблагодарили 4.862 раз(а) в 856 сообщениях
Репутация: 14589
По умолчанию

Kathrein Tools

Instalator E2 4 Kathrein_Octagon v-0,7

Код:
1. Installation SoftUSB2 and E2 - in fact, this option should be used only when installing softusb2 and E2 is the first time, or pen-and changed, or damaged we Softusb2, which reveals not display bootmenu. The function of the pen erases all existing partitions, assumes a new, reformats it, installs softusb2, installs and configures the main e2 bootmenu.
 
2. Installing new version of the E2 (update) - use it when you want to record a new version of the E2 to the already installed in step 1 and existing standard as a 2 point bootmenu. It works only on the installation Świerże E2 and change the entry bootmenu. No other files on the pen are not deleted.
 
3. Doinstalowanie new firmware E2/neutrino/inne:
- Unpack the downloaded zip file with the soft / zip to a file tar.gz
- Select the advanced options
- Then unpacking / installation of a new distribution of E2
- When asked "Do you unpack the distribution of E2 to the directory?" persons using the EXT3 may respond, depending on preference. People who use the FAT file system this question does not appear.
- When asked "Do you create an image Softusb2?" answer YES
- Choose soft we want. Eg Neutrino_tdt-2001_PKT-178.tar.gz
- We give the name of the created image. Such as neutrino
- Size of the created image can be left to 256MB.
- When you create image entering to the "Manage BootMenu"
- We press download
- Zaznaczamynastępną empty position bootitem
- In the name box type the text you want to appear on the display. Such as neutrino
- Field type always choose e2 for E1/E2/Neutrino/VDR
- Select type field softusb2
- Press the question mark on the right side of the field parameters
- Mark the file you created earlier neutrino.uImage
- Field of parameters, for example, should look for example like this: .. / images / neutrino
- We press Save
- We press download to see if bootmenu been changed
- We close the program and look forward to the new firmware doinstalowanego
 
4. Doinstalowanego firmware update earlier E2/neutrino/inne:
- Unpack the downloaded zip file with the soft / zip to a file tar.gz
- Select the advanced options
- Then unpacking / installation of a new distribution of E2
- When asked "Do you unpack the distribution of E2 to the directory?" persons using the EXT3 may respond, depending on preference. People who use the FAT file system this question does not appear.
- When asked "Do you create an image Softusb2?" answer YES
- Choose soft we want. Eg Neutrino_tdt-2001_PKT-178.tar.gz
- Box enter the same image, which was used previously. This will overwrite the old files with new ones.
- Size of the created image can be left to 256MB.
 
5. Removing unnecessary entries from bootmenu:
- Run the installer E2
- Enter the advanced options
- Then to manage bootmenu
- Press download
- If you have questions about the type of partition, answer truthfully 
- Is characterized by the bootitem you want to delete. Of course you can uncheck any, even the middle. The rest will be poprzesuwana during a write operation
- Press Save and then download the purposes of checking whether our settings are correctly inscribed
 
6. Improved network configuration:
- Run with the tuner Drivers in flash
- Run the installer E2
- Enter the advanced options
- Then telnet
- We press the button "Configure network for E2
- We reaffirm that the tuner is running with the Drivers in flash
- We reaffirm that the tuner is in standby mode
- When asked "Do you use EXT3?" answer YES if softusb2 is installed on your system EXT3, or NO if the FAT
- We provide a correct gateway address
- Changing the mask, if necessary
- Waiting until the completion of the work, which show the information:
-> Uboot (2) network configured
IP address: 192.168.1.7
Netmask: 255.255.255.0
Gateway: 192.168.1.1
Server: 192.168.1.1
/ tmp/configurator/softusb2 #
мой , хоть и кривой , но перевод

Код:
1. установка SoftUSB2  и Е2 (Installation SoftUSB2 and E2) -  эта опция должна использоваться только при первичной установке softusb2 и Е2 , а также при изменении или повреждении  Softusb2, при котором загрузочное меню не отображается. Функция установка SoftUSB2  и Е2 (Installation SoftUSB2 and E2) (заливки,переустановки,стирания) стирает все существующие разделы, создавая (предполагая) новые, форматирует их, устанавливает softusb2, устанавливает и настраивает основные E2 загрузочное меню. 
 
2. Установка новых версий Е2 (обновленная) - используйте ее, если вы хотите,  записать новую версию в то время , как  Е2 уже установлен в  загрузочное меню. Это работает только на установку Swierze Е2 и изменяет запись загрузочного меню. Никаких других файлов  не удаляется. 
 
3. Doinstalowanie -  новая прошивка E2/neutrino/inne: 
- Распакуйте  Zip - архив в папку tar.gz 
- Выберите дополнительные параметры 
- Далее распакуйте и инсталлируйте новый дистрибутив E2 
- На вопрос: "Желаете ли Вы распаковать Е2 в каталоге?" ("Do you unpack the distribution of E2 to the directory?" ) - лицам, использующим EXT3 можно  ответить, в зависимости от предпочтений. У людей,у  которых используется файловая система FAT, этот вопрос не возникает. 
- На вопрос: "Вы создаете образ Softusb2?"("Do you create an image Softusb2?" )- Отвечайте ДА 
- Выбрать софт , который Вам нужен. Например Neutrino_tdt-2001_PKT-178.tar.gz 
- Дайте (выберите) название создаваемому файлу . Такой же , как нейтрино 
- Размер созданного файла может быть не более  256MB. 
- Когда вы создали образ файла, зайдите в   "Управление загрузочным меню"(Manage BootMenu"
) 
- Далее жмите - Скачать(download
) 
- Отметьте далее  пустые boot позиции 
- В поле -Тип Название- Текст будет отображаться на дисплее. Такие, как нейтрино 
- Тип поля всегда выбирать E2 для E1/E2/Neutrino/VDR 
- Выберите тип области softusb2 
- Нажмите на знак вопроса на правой стороне поля параметры 
- Выберите файл, который вы создали (распаковали) ранее neutrino.uImage 
- Область параметров, например, должна выглядеть например так: .. / Images / neutrino
 
- Нажмите Сохранить 
- Нажимаем скачать, чтобы увидеть, было ли  изменено загрузочное меню 
- Закрываем программу 
 
4. Обновление более ранних E2/neutrino/inne: 
- Распакуйте скачанный файл Zip  в папку tar.gz 
- Выберите дополнительные параметры 
- при распаковке / установке нового распределения E2 
- на вопрос: "распаковать Е2 в каталоге?" лицам, использующим EXT3 может ответить, в зависимости от предпочтений. Люди, которые используют файловую систему FAT этот вопрос не возникает. 
- Когда спросили: "Вы создаете образ Softusb2?" Ответ ДА 
- Выбрать прошивку. Например Neutrino_tdt-2001_PKT-178.tar.gz 
- Box введет (зальет) тот же самый образ, который был использован ранее. Это будет замещать старые файлы новыми. 
- Размер созданного образа может быть оставлена на 256MB. 
 
5. Удаление ненужных записей из загрузочного меню: 
- Запуск установки E2 
- Введите дополнительные параметры 
- Затем зайдите в управление загрузочным меню
- нажать - Скачать(download)
 
- Если у вас есть вопросы о типе раздела, правдиво ответить 
- выберите то , что вы хотите удалить. Конечно, вы можете удалять в любом месте , даже посередине. Все остальное будет сжато и распределено  во время операции записи 
- Нажмите Save, а затем перепроверьте правильность написания 
6. Улучшенная конфигурация сети: 
- Запуск с драйверами тюнера во флэш 
- Запуск установки E2 
- войдите в  дополнительные параметры 
- далее Telnet 
- Нажимаем кнопку "Настройка сети для E2 
- Мы подтверждаем, что тюнер работает с драйверами в Flash 
- Мы подтверждаем, что тюнер находится в режиме ожидания 
- На вопрос: "Используете ли вы EXT3?" Ответ ДА, если softusb2 установлены на вашей системе ext3, или НЕТ, если FAT 
- устанавливается  правильный адрес шлюза (порта)
- Изменените маску, если необходимо 
- Ожидание до завершения работ, которые показывают информацию: 
-> Uboot (2) сеть настроена 
IP адрес: 192.168.1.7 
Маска сети: 255.255.255.0 
Шлюз: 192.168.1.1 
Сервер: 192.168.1.1 
/ Tmp/configurator/softusb2 #
  Ответить в расширенном режиме
Старый 05.03.2010, 22:12   #9
RATVOD
Супер Модератор

 
Аватар для RATVOD
 
RATVOD вне форума
Регистрация: 01.08.2009
Страна: Ukraine
Адрес: Киевская, Тараща.
Возраст: 63
Сообщений: 548
Сказал(а) спасибо: 8.944
Поблагодарили 4.862 раз(а) в 856 сообщениях
Репутация: 14589
По умолчанию

Kathrein_E2_Plugin_Stinkefisch_ConstantCW

Version 1.5
Update 04.03.10

E2 Plugin Version

Extract rar file to
/usr/lib/enigma2/python/Plugins/Extensions/

chmod -R 755 /usr/lib/enigma2/python/Plugins/Extensions/ConstantCW

Restart Enigma2 and
Have fun
  Ответить в расширенном режиме
Старый 17.03.2010, 20:58   #10
RATVOD
Супер Модератор

 
Аватар для RATVOD
 
RATVOD вне форума
Регистрация: 01.08.2009
Страна: Ukraine
Адрес: Киевская, Тараща.
Возраст: 63
Сообщений: 548
Сказал(а) спасибо: 8.944
Поблагодарили 4.862 раз(а) в 856 сообщениях
Репутация: 14589
По умолчанию

Instalator E2 4 Kathrein_Octagon v-0,8

Код:
1. Installation SoftUSB2 and E2 - in fact, this option should be used only when installing softusb2 and E2 is the first time, or pen-and changed, or damaged we Softusb2, which reveals not display bootmenu. The function of the pen erases all existing partitions, assumes a new, reformats it, installs softusb2, installs and configures the main e2 bootmenu.

2. Installing new version of the E2 (update) - use it when you want to record a new version of the E2 to the already installed in step 1 and existing standard as a 2 point bootmenu. It works only on the installation Świerże E2 and change the entry bootmenu. No other files on the pen are not deleted.

3. Doinstalowanie new firmware E2/neutrino/inne:
- Unpack the downloaded zip file with the soft / zip to a file tar.gz
- Select the advanced options
- Then unpacking / installation of a new distribution of E2
- When asked "Do you unpack the distribution of E2 to the directory?" persons using the EXT3 may respond, depending on preference. People who use the FAT file system this question does not appear.
- When asked "Do you create an image Softusb2?" answer YES
- Choose soft we want. Eg Neutrino_tdt-2001_PKT-178.tar.gz
- We give the name of the created image. Such as neutrino
- Size of the created image can be left to 256MB.
- When you create image entering to the "Manage BootMenu"
- We press download
- Zaznaczamynastępną empty position bootitem
- In the name box type the text you want to appear on the display. Such as neutrino
- Field type always choose e2 for E1/E2/Neutrino/VDR
- Select type field softusb2
- Press the question mark on the right side of the field parameters
- Mark the file you created earlier neutrino.uImage
- Field of parameters, for example, should look for example like this: .. / images / neutrino
- We press Save
- We press download to see if bootmenu been changed
- We close the program and look forward to the new firmware doinstalowanego

4. Doinstalowanego firmware update earlier E2/neutrino/inne:
- Unpack the downloaded zip file with the soft / zip to a file tar.gz
- Select the advanced options
- Then unpacking / installation of a new distribution of E2
- When asked "Do you unpack the distribution of E2 to the directory?" persons using the EXT3 may respond, depending on preference. People who use the FAT file system this question does not appear.
- When asked "Do you create an image Softusb2?" answer YES
- Choose soft we want. Eg Neutrino_tdt-2001_PKT-178.tar.gz
- Box enter the same image, which was used previously. This will overwrite the old files with new ones.
- Size of the created image can be left to 256MB.

5. Removing unnecessary entries from bootmenu:
- Run the installer E2
- Enter the advanced options
- Then to manage bootmenu
- Press download
- If you have questions about the type of partition, answer truthfully ;-)
- Is characterized by the bootitem you want to delete. Of course you can uncheck any, even the middle. The rest will be poprzesuwana during a write operation
- Press Save and then download the purposes of checking whether our settings are correctly inscribed

6. Improved network configuration:
- Run with the tuner Drivers in flash
- Run the installer E2
- Enter the advanced options
- Then telnet
- We press the button "Configure network for E2
- We reaffirm that the tuner is running with the Drivers in flash
- We reaffirm that the tuner is in standby mode
- When asked "Do you use EXT3?" answer YES if softusb2 is installed on your system EXT3, or NO if the FAT
- We provide a correct gateway address
- Changing the mask, if necessary
- Waiting until the completion of the work, which show the information:
  Ответить в расширенном режиме
Ответ

Социальные закладки

Опции темы

Ваши права в разделе
Вы не можете создавать новые темы
Вы не можете отвечать в темах
Вы не можете прикреплять вложения
Вы не можете редактировать свои сообщения

BB коды Вкл.
Смайлы Вкл.
[IMG] код Вкл.
HTML код Выкл.

Быстрый переход



Текущее время: 18:17. Часовой пояс GMT +2.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc. Перевод: zCarot
При использовании материалов ссылка на сайт обязательна.
Время генерации страницы 0.12941 секунды с 16 запросами